As specialists with a great deal of practical experience, we know the maximum power and security requirements that you place on your electronic devices. Our high-performance PCB terminals, PCB connectors and panel feedthrough terminal blocks therefore also comply with applicable device standards such as the IEC 61800 standard for speed-controlled drive technology. PCB terminals with PUSH IN wire connection and application-specific connectors for motor connection with shield support complete the range.
Application-oriented attachment options and tried-and-tested connection systems, such as PUSH IN, combine ease of use with safety.
OMNIMATE® contains all of the features necessary to meet the most demanding power and security requirements.
Application-specific scalability of the connections and unrestricted use for UL 600 V and IEC 61800 (generic interface and use of profiles for power drive systems).
Weidmüller‘s OMNIMATE® Power products include PCB terminals, PCB connectors and through-panel terminals for use in power electronics, particularly in inverters, frequency converters, servo drives, heavy-duty power supplies and motor starters.
Learn more about the application-oriented solutions for motor connections, with pluggable shield connection and higher safety requirements.
The simple plug-and-play solution is ideal for the fast, tool-free replacement of individual modules from a network of multi-axis servo drives.
The system guarantees a secure, absolutely finger-safe latching of the busbar connectors. The tolerance compensation of the rail system facilitates the secure fastening of the entire axle system.
The use of already registered UL components promotes approval. Besides, development becomes superflous, the project lead time shortens, and unnecessary investments decline significantly.
Connecting the power supplies of devices requires a simple connection. This trend is particularly evident when it comes to energy recovery by means of DC link for drives.
PUSH IN technology reduce the connection time, just insert the wire into the clamping point – without any tools. And for releasing the wires the push buttons are easily accessible in the center of the connector.
BVDF bus-connector with two connections per pole is plug-compatible with the pin headers of the SV-series and thus enables the flexible selection of connectors for devices. Single devices can be connected to the BVF as a single-row standard connector.
Thanks to the self-locking middle flange or side locking flange of the BVDF, both with additional screw fixing, for a secure fit with tight bending radius of the connected wires.
The efficiency of your manufacturing processes depends mainly on the amount of wiring required. Weidmüller components with PUSH IN technology reduce your connection times by up to 50 %.
With PUSH IN, the conductor is simply inserted into the terminal point up to the stop and a secure and gas-tight connection is established - without any tools. Learn more about PUSH IN connections and how you can increase your efficiency and the quality of your work.
With PCB and device designs, there always comes a point at which design engineers need to find exactly the right connection for their application. Order your design-in samples, quickly and easily:
Discover our scope of PCB terminals and connectors
Our wide range of applications-based products includes PCB terminals and connectors, feed-through terminals, and electronics housings for industrial applications with emphases on signal processing and power electronics.
When working with applications, you'll need to find ways of successfully implementing your ideas.
Simply select your device application in our AppGuide, and we will recommend a range of products for all the different functions of your device.
The contact point can be opened without any physical exertion and without the need of any special tools. It can be done by hand or using a simple screwdriver.
Easily accessible diagnostic testing points for necessary maintenance and measurements in direction of cable entry or on the actuating lever side allows the using of tester or connector PS2.
The contact system is getting automatically closed after it was opened. This intelligent “Connection Safety Concept” helps ensure that the wire is always safely connected.
The PUSH IN connection system allows a toolfree wire connection to the PCB board. Solid wires or wires with ferrules can be directly plugged.
You are interested interface requirements and hybrid connection solutions between a motor with encoder and the drive in the control cabinet, e.g. based on HIPERFACE DSL® or SCS open link?
Gain valuable expertise and optimal support with the technical white paper and alternate video.
A QR code on the product and the packaging leads directly to the corresponding handling video at YouTube. In these Tutorials, individual installation steps can be traced directly during processing.
Weidmüller provides you with handling videos for various OMNIMATE® products in the YouTube Channel.
Due to its construction with only 5.1 mm wide slices, you can build simple, space-saving terminal blocks with plenty of poles - for various and flexible application options.
Reduced assembly costs and simple handling with the intuitive fastening mechanism, which fastens the terminal block in the housing cut-out in seconds
The PUSH IN connection system allows to connect conductors quickly and offers a large connection cross-section. Conductor connections with a cross-section of up to 4.0 mm² with ferrules are possible.
WGK series lead-through terminals consist of an inside and outside component that are easily locked with one another through the housing wall without any tools for an easy handling.
Order your design-in samples, quickly and easily in our product catalogue. Use the free 72-hour sample service for OMNIMATE®. We deliver your samples to the desired location within 72 hours.
Simply select your device application in our AppGuide, and we will recommend a range of products for all the different functions of your device.
CAD 3D models in various formats, CAE data and component libraries for different EDA systems are available for download in our product catalogue.
Find out more about the latest trends and technologies in device connectivity in our white papers.
Use the product configurator to quickly select device connectivity to adapt them according to your application's component specifications and requirements.
Discover our highlights at our virtual fair world. Immerse yourself in Weidmüller's digital fair world and learn more about the topics Smart Factory, solutions for the shop floor, end-to-end connections and interfaces, charging infrastructure for electromobility and exciting product innovations.